330 Gallon IBC Tote
The larger of the two standard IBC tote sizes, offering about 20% more capacity on the same footprint. Typical dimensions, materials, valve options, and applications.
Order 330 Gallon IBC Totes
Send a free quote request for 330 gallon IBC totes and a partner supplier follows up with new, reconditioned, or used options.
330 Gallon IBC Tote Dimensions & Specs
| Specification | Details |
|---|---|
| Capacity (US Gallons) | 330 gallons |
| Capacity (Liters) | About 1,250 liters |
| Length | About 48 inches (~122 cm) |
| Width | About 40 inches (~102 cm) |
| Overall Height | About 53 inches (~135 cm) |
| Specific Gravity Rating | Varies by model; shown on the marking plate |
| Inner Bottle Material | High-Density Polyethylene (HDPE) |
| Cage Frame Material | Galvanized steel |
| Footprint | Roughly 48" x 40" (close to a standard pallet) |
330 Gallon vs 275 Gallon
Understanding the key differences helps you choose the right size for your operation.
| Feature | 275 Gallon | 330 Gallon | Difference |
|---|---|---|---|
| Capacity | 275 gal (~1,000 L) | 330 gal (~1,250 L) | About 20% more volume |
| Height | ~46" | ~53" | About 7" taller |
| Footprint | ~48" x 40" | ~48" x 40" | Same |
| Weight When Full | Lighter | Heavier | Roughly 450 lbs more with water |
| Clearance Needed | Lower | Higher | Measure racking and doorways |
Valve Types & Discharge Options
2" Butterfly Valve
The most common valve on 330 gallon IBC totes. The butterfly valve uses a rotating disc to control flow, providing quick open/close operation and reliable sealing. The 2-inch size is the most common and works with widely available hose fittings, adapters, and dispensing equipment.
Flow rate: Depends on how full the tote is and the liquid's viscosity.
2" Ball Valve
Ball valves provide a full-bore opening for maximum flow and minimal pressure drop. The quarter-turn operation makes them easy to use, and the tight seal makes them ideal for chemical handling applications. Ball valves are preferred when precise flow control and leak prevention are critical.
Best for: Chemicals, solvents, and applications where a tight seal matters.
Fill Opening & Pallet Options
Fill Opening Options
The most common fill opening on a 330 gallon IBC tote is a 6-inch threaded screw lid. Some models have a larger opening, which helps with viscous liquids and cleaning access.
Vented caps are available, allowing air in during dispensing to prevent vacuum lock and keep flow from the bottom valve smooth. Non-vented caps keep the tote sealed.
Pallet Base Options
The 330 gallon IBC tote comes with steel, composite, wooden, or plastic pallet bases. Steel bases are durable and repairable, which matters for a container this heavy when full.
Composite and plastic pallets are lighter and resist corrosion. Wooden pallets are low cost but absorb moisture and wear out sooner.
Gaskets and Seals
EPDM gaskets are common on the lid and valve. For some chemicals, solvents and fuels, other gasket materials are used for better resistance. Check compatibility for the liquid you plan to store.
Materials & Build Details
The 330 gallon IBC tote uses the same basic construction as the 275 gallon model: an HDPE bottle inside a galvanized steel cage on a pallet base.
HDPE Inner Bottle
The inner container is blow-molded from high-density polyethylene (HDPE), a tough plastic with broad chemical compatibility. Always check compatibility for the specific liquid you plan to store.
HDPE can degrade with long sun exposure, so prolonged outdoor storage should include a cover or shading. Check the manufacturer's temperature limits for warm or hot liquids.
Steel Cage Assembly
The galvanized steel cage is taller than on the 275 gallon model to match the taller bottle. The cage provides crush protection, impact resistance, and the structural framework for stacking.
Stackability
Caged 330 gallon totes are designed to stack. How many high is safe depends on the tote's rating, condition, contents and whether it is full, so check the marking plate and manufacturer guidance. Take extra care when mixing manufacturers.
Common Uses for 330 Gallon IBC Totes
Food & Beverage
Used for liquid ingredients such as syrups, juice concentrates, cooking oils, vinegar, and sweeteners. Totes used for food are generally kept in food service.
Chemical Processing
Industrial chemicals, cleaning solutions, solvents, antifreeze, coolants, and process chemicals. The larger volume reduces the number of container changes during production runs.
Agriculture
Liquid fertilizer, feed supplements, and spray solutions, where more volume per container means fewer refills.
Bulk Water Storage
Large-scale rain harvesting, emergency preparedness water reserves, construction site water supply, and agricultural irrigation systems where maximum volume per container is needed.
Paint & Coatings
Latex paint, industrial coatings, stains, sealants, and adhesive compounds. A wider fill opening, where available, makes loading viscous products easier.
Fuel & Lubricants
Diesel fuel, biodiesel, motor oil, hydraulic fluid, and transmission fluid storage. Always verify that the tote is rated for the specific fuel type and meets local fire code requirements.
Industries That Use 330 Gallon IBC Totes
Both 275 and 330 gallon totes are widely used. Some buyers standardize on the 330 gallon size for volume efficiency or to match their batch sizes.
- Food and beverage manufacturing
- Chemical blending and distribution
- Paint and coatings manufacturing
- Cosmetics and personal care products
- Cleaning product formulation
- Wine and spirits production
- Fuel distribution and storage
- Water treatment facilities
- Industrial adhesive and sealant production
Looking for 330 Gallon IBC Totes?
Partner suppliers in the ABC IBC network offer new, rebottled, reconditioned and used 330 gallon totes. Pricing is by quote and depends on condition, quantity and location. Send a request and a partner supplier follows up.